jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
TO SERVICE THE BETA C360 Remove the grille. 1. Remove the (4) rubber grille retainers on the center section of the front faceplate; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 2. Remove the (4) Phillips screws that are now exposed and the (8) Hex screws (5/32 or 4mm) surrounding the woofers. 3. Carefully separate the front faceplate, with tweeter attached, from the cabinet. 4. Woofer: Remove the (4) Phillips screws per driver that are now exposed. 5. Midrange: Remove the (4) Phillips screws that are now exposed. Note the crossover network is not integrated with the rear terminal cup, and must be accessed through the left woofer opening.
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
4/05